Tarheel Antenna parts

SS-6 6 ft. Stainless Steel Whip

This is our standard 6 ft. stainless steel whip. We custom machine our own heavy duty ferrule to go on the end of this whip. The taper of this whip for the first 12 inches is .200 thick and then tapers to .100 thick for the remainder of the whip length. We recommend this whip on the Models 75 through 400 antennas for full frequency coverage. It uses the standard 3/8 x 24 thread. This antenna also comes with the purchase of your antenna.

$30.00

HP-6 High Power 6 ft. Whip

This is our High Power version of the 6 ft. stainless steel whip. It uses a large 3/4" corona ball on top to prevent a corona discharge for those running over 500 watts. We custom machine our own heavy duty ferrule to go on the end of this whip. This is a very stiff whip, the taper for the first 36" is .200 thick and then tapers to .150 thick for the remainder of the whip length. We recommend this whip on the Models 100 and 200 antennas for full frequency coverage. It uses the standard 3/8 x 24 thread

$40.00

LT-56 Whip for Little Tarheel & Little Tarheel II

This is a 56 in. stainless steel whip.

$15.00

CH-1 Capacitance Hat

The Capacitance Hat is designed to help in two ways. First, you can use the capacitance hat with a whip as short as 30" and get the same frequency coverage as the 6' whip without sacrificing performance. Second, you can add the 6' whip to the top of the capacitance hat and get a big improvement in performance on the lower bands. The base of the capacitance hat is 12" tall with standard 3/8 x 24 thread at both ends. It uses 8 stainless steel rods 12" long each at 90 degrees to the antenna for maximum capacitance with less weight.

$69.00

Second Station Kit

This is our standard Switch Box Kit that comes with our antennas. It comes with the standard hardware that is included with the antennas. We offer them just in case you need one for a second location.

$39.00

Control Cables

If you see your 20 ft. control cable is not long enough for your installation and you have a need for a longer control cable we have them in 100 foot sections with the connectors already installed on the ends as well as additional 5 ft., 10 ft. 20 ft. or 50 ft. extensions.

5 ft. $13.95 10 ft. $17.95

20 ft. $19.95

50 ft. $26.95 100 ft. $39.95