 |
MT
1
|
| The MT 1
mount is made for the Models 100, 200, 300 and 400 antenna. It's
made of 304 stainless steel so it's corrosion resistant and very
strong. It comes already assembled with the coax stud. Even the
supplied U bolts and nuts are stainless steel. This bracket will
bracket up to a 1" industry standard pipe. $119.00 |
|
|
|
MT
1s |
 |
|
The MT 1s mount is made for the Models 75,
100 and 300 antenna. It's made of 304 stainless steel so
it's corrosion resistant and very strong. It comes already
assembled with the coax stud. Even the supplied U bolts and
nuts are stainless steel. This bracket will bracket up to a
1" industry standard pipe. $114.00 |
|
 |
LTMT
1 |
|
The LTMT 1 mount is made for
the Little Tarheel antenna. It's made of 304 stainless
steel so it's corrosion resistant and very strong. It comes
already assembled with the coax stud. Even the supplied U
bolts and nuts are stainless steel. This bracket will
bracket up to a 1" industry standard pipe. $89.00 |
|
|
MT
2 |
 |
| The MT 2 mount
is made as a support for the MT 1 mount. This mount is also all 304
stainless steel, included with the mount is stainless steel mounting
bolts, washers and nuts. This mount comes with extra holes punched in
it so it can be mounted to almost anything. $89.00
|
|
|
 |
MT
3 |
| The MT 3 mount
is made as a support for the MT 1 mount, it's designed for the 2" x 2"
receiver. This mount is also 304 stainless steel. The mount comes with
an installed anti-rattle kit. $89.00 |
|
|
|
MT
4 |
 |
|
The MT 4
mount is made as a support for the MT 1 mount, it's designed for
the 1 1/4" x 1 1/4" receiver. This mount is also 304 stainless
steel. The mount comes with an installed anti-rattle kit.
$89.00 |
|
|
 |
MT
3 FB |
|
The MT 3 FB mount is made as a
support for the MT 1 mount, it's designed for the 2" x 2"
receiver. This mount is designed to fold back to allow you to
open the doors on your SUV or let the tailgate down on your
pickup. This mount is also 304 stainless steel. The mount comes
with an installed anti-rattle kit.
$144.00 |
|
|
|
MT
4 FB |
 |
|
TThe
MT 4 FB mount is made as a support for the MT 1 mount, it's
designed for the 1 1/4" x 1 1/4" receiver. This mount is
designed to fold back to allow you to open the doors on your
SUV or let the tailgate down on your pickup. This mount is
also 304 stainless steel. The mount comes with an installed
anti-rattle kit |
$144.00 |
|
|
 |
MT
3 OFB |
|
The MT 3 OFB mount is made as a
support for the MT 1 mount, it's designed for the 2" x 2"
receiver. This mount is designed to fold back to allow you to
open the doors on your SUV or let the tailgate down on your
pickup; it is also offset in order for you to get an
unobstructed view of that custom license plate. Also, on split
door SUVs it lets you open the right door without folding back.
This mount is also 304 stainless steel. The mount comes with an
installed anti-rattle kit.
$169.00 |
|
|
MT
5 |
 |
|
The MT 5 manual lift & lay mount
is made as a support for the MT 1 mount, it's designed to be
used in the bed of a truck or any where that you choose to use
your antenna in a manner that would require you to lay the
antenna down. This mount is also 304 stainless steel. |
|
$149.00 |
|
|
|
MT
6 |
|
The MT 6
manual lift & lay mount is made as a support for the MT 1 mount,
it's designed to be used in the bed of a truck or any where that
you choose to use your antenna in a manner that would require
you to lay the antenna down.
This is a taller version of the MT
5, designed to lay the antenna over the wheel well.
This
mount is also 304 stainless steel |
|
$159.00 |
|
