BX Tower

Now Manufactured By

Thomas Shelby & Company, Inc.

(Using all the original ROHN tooling)

 
  • X Brace design for strength. Braces riveted in center as well as ends.
  • All Riveted Construction.
  • Greater width and weight at bottom.
  • Beaded channel leg for added strength
  • All steel.
  • Pregalvanized for added life.
  • Rotators easily installed.
  • Three steps included on one face of top section.
  • Sections nest inside each other for compact shipment.
BX   HBX   HDBX
Standard
Basic Tower Needs		   Heavy Duty
For Heavier Capacity		   Extra Heavy Duty
Our Heaviest BX Tower
Maximum height 64'   Maximum height 56'   Maximum height 48'
Can be used with Concrete Base Stubs   Can be used with Concrete Base Stubs   Can be used with Concrete Base Stubs
Available in heights of 24' to 64' in 8' increments   Available in heights of 24' to 56' in 8' increments   Available in heights of 24' to 48' in 8' increments
Up to 6 square feet antenna capacity   Up to 12 square feet antenna capacity   Up to 20 square feet antenna capacity
Top of tower is a 8-1/8" triangle   Top of tower is a 10-3/16" triangle   Top of tower is a 12-3/4" triangle
Includes 8' mast (M8)   Mast not included   Mast not included
Always has #1 as a top section   Always has #2 as a top section   Always has #3 as a top section
Go to top sections   Go to top sections   Go to top sections

 

tower1.jpg (17011 bytes)

 BX Tower Product Listing

tower3.jpg (9581 bytes)
Accessories
Parts & Descriptions (1 of 2)
Parts & Descriptions (2 of 2)
Parts List
BX Tower Information
Allowable Antenna Loads
BX Series Tower (Section 1)
BX Series Tower (Sections 2 - 8)
BX Series Tower Typical 64' Tower (Sections 1 - 8)
Concrete Base Specs.

 

 WBØW, Inc., 2002.
Website design & Maintained by WBØVRD,   WebSite Problem