1.5 kW
Dry Dummy Load has built-in precision, true peak-reading SWR/Wattmeter
switchable to external antenna!
World's
most versatile 1.5 kW dummy load has a built-in true peak reading
SWR/Wattmeter that you can switch and use independently!
You'll
find tons of uses!
Tune
up your transceiver, linear amplifier, or antenna tuner into a safe 50
Ohm dummy load at full power. Then instantly switch to your
antenna and monitor SWR, forward, and reflected power.
Use
for testing/tuning transmitters, transceivers, amplifiers, antenna
tuners, baluns, transformers, filters, matching networks, coax, stubs,
transmission lines, and antennas.
The
50-Ohm dry dummy load works DC to 60 Mhz. SWR is below 1.3:1 at 30 MHz.
Can handle 100 Watts for ten minutes or 1500 Watts for ten seconds.
Comes with power derating curve.
Extra-large three-inch lighted Cross-Needle
Meter reads SWR (1:1 to 8:1), forward, and reflected power
simultaneously.
Reads
true peak PEP or average power on 300/3000 Watts forward and
60/600 Watts reflected power ranges 1.8-54 MHz.
High
accuracy comes from a carefully designed directional coupler, an
accurate active-peak reading circuit and a precision d'Arsonval meter
movement.
RF
tight perforated aluminum cabinet. 4½W x 3½H x 10½D inches. Uses 12 VDC
or 120 VAC with the MFJ-1312D. |
