MOBILE MOUNTS AND COAX ASSEMBLIES
|
CP-5M
|
|
Universal adjustable lip mount, 16’ 6” deluxe cable assembly with
SO-239/PL-259 connectors. Quality appearance and low loss coax cable
assembly. Installs easily in only minutes to virtually any lip on a
vehicle. Trunk lid, truck rear doors, SUV and van rear doors, hood lip,
etc… Does not damage expensive and/or leased vehicles.
Mount adjusts in 4 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax
balance is low loss with 24k gold plated SO-239 & PL-259 connectors.
The PL-259 disassembles for easier routing or to shorten the coax
length. Soft rubber pad protects the vehicle paint, 4 large set screws
hold the mount firmly in place.
|
|
|
CP-5 NMO
|
|
Universal adjustable lip mount, 16’ 6” deluxe cable assembly with NMO/PL-259
connectors. Quality appearance and low loss coax cable assembly.
Installs easily in only minutes to virtually any lip on a vehicle:
Trunk lids, truck rear doors, SUV and van rear doors, hood lip, etc…
Does not damage expensive and/or leased vehicles.
Mount adjusts in 4 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax
balance is low loss with NMO & PL-259 connectors. The PL-259 connector
disassembles for easier routing or to shorten the coax length. Soft
rubber pad protects the vehicle paint, 4 large set screws hold the mount
firmly in place.
|
|
| |
|
|
CP-5 3/8-24
|
|
Universal adjustable lip mount, 16’ 6” deluxe cable assembly with
38/-24/PL-259 connectors. Quality appearance and low loss coax cable
assembly. Installs easily in only minutes to virtually any lip on a
vehicle: Trunk lids, truck rear doors, SUV and van rear doors, hood
lip, etc… Does not damage expensive and/or leased vehicles.
Mount adjusts in 4 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax
balance is low loss with 3/8-24 & PL-259 connectors. The PL-259
connector disassembles for easier routing or to shorten the coax
length. Soft rubber pad protects the vehicle paint, 4 large set screws
hold the mount firmly in place.
|
|
|
EM-5M
|
|
When you have limited space or a curved edge on the trunk lid, van door,
etc, the EM-5M solves the problem!
It has a very small footprint but is made of heavy-duty steel.
Universal adjustable lip mount with 16’ 6” deluxe cable assembly,
SO-239/PL-259 connectors. Quality appearance and low loss coax cable
assembly. Installs easily in only minutes to virtually any lip on a
vehicle. Trunk lid, truck rear doors, SUV and van rear doors, hood lip,
etc… Does not damage expensive and/or leased vehicles.
Footprint: 1.1" x .75"
Mount adjusts in 2 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax
balance is low loss with 24k gold plated SO-239 & PL-259 connectors.
The PL-259 disassembles for easier routing or to shorten the coax
length. Soft rubber pad protects the vehicle paint, 2 large set screws
hold the mount firmly in place.
|
|
| |
|
|
 HD-5 3/8-24
|
Heavy Duty lip mount with a 3/8-24
threaded socket to accept small screw-driver antennas, CB antennas,
etc...
Universal adjustable lip mount, 16' 6”
deluxe cable assembly with 3/8-24/PL-259 connectors. Quality
appearance and low loss coax cable assembly. Installs easily in only
minutes to virtually any lip on a vehicle. Trunk lid, truck rear
doors, SUV and van rear doors, hood lip, etc… Does not damage
expensive and/or leased vehicles.
A lateral support tab is part of the lip
mount. Be sure this support tab will not interfere with the
opening/closing of the door, trunk, etc...
Mount adjusts in 3 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax balance
is low loss, 3/8-24 threaded socket to accept the antenna coax
terminates in a PL-259 connector. The PL-259 disassembles for easier
routing or to shorten the coax length. Soft rubber pad protects the
vehicle paint, 4 large set screws hold the mount firmly in place
|
|
|
HD-5 M
|
Universal adjustable lip mount, 16' 6”
deluxe cable assembly with SO-239/PL-259 connectors. Quality
appearance and low loss coax cable assembly. Installs easily in only
minutes to virtually any lip on a vehicle. Trunk lid, truck rear
doors, SUV and van rear doors, hood lip, etc… Does not damage
expensive and/or leased vehicles.
A lateral support tab is part of the lip
mount. Be sure this support tab will not interfere with the
opening/closing of the door, trunk, etc...
Mount adjusts in 3 planes. The first 18 inches of coax is mini RG-188A/U
type allowing easy entry through the weather seal into the vehicle
without causing wind noise, water leaks or coax damage. The coax balance
is low loss with 24k gold plated SO-239 & PL-259 connectors. The PL-259
disassembles for easier routing or to shorten the coax length. Soft
rubber pad protects the vehicle paint, 4 large set screws hold the mount
firmly in place.
|
|
| |
|
|
CM-5M |
|
Standard 4.5” magnet mount with
SO-239/PL-259 connectors with 13’ of RG-58A/U coax. |
|
|
CT-5M
|
|
Standard trunk lip mount with SO-239/PL-259
connectors. Adjusts up to 17 degrees to compensate for trunk angle.
Included 16’ 6” of RG-58A/U. |
|
| |
|
|
GRB-5M
|
|
Deluxe trunk lip mount, 16’ 6” cable length with SO-239/PL-259
connectors. Adjusts up to 17 degrees to compensate for trunk angle.
Quality appearance and low loss coax cable assembly installs easily in
minutes.
The first 18 inches of coax is mini RG-188A/U type allowing easy entry
through the weather seal into the vehicle without causing wind noise,
water leaks or coax damage. The coax balance is low loss with 24k gold
plated SO-239 & PL-259 connectors. The PL-259 connector disassembles
for easier routing or to shorten the coax length. Soft rubber pad
protects the vehicle paint, 4 large set screws hold the mount firmly in
place. |
|
|
GR-5N
|
|
Deluxe trunk lip mount, 16’ 6” cable length with N-female/N-male
connectors. Adjusts up to 17 degrees to compensate for trunk angle.
Quality appearance and low loss coax cable assembly installs easily in
minutes.
The first 18 inches of coax is mini RG-188A/U type allowing easy entry
through the weather seal into the vehicle without causing wind noise,
water leaks or coax damage. The coax balance is low loss with 24k gold
plated N connectors. The N-male connector disassembles for easier
routing or to shorten the coax length. Soft rubber pad protects the
vehicle paint, 4 large set screws hold the mount firmly in place. |
|
| |
|
|
CK-3M |
|
Deluxe Cable Assembly. 10 ft. total length
including 18 inches of RG-188 teflon coax for easy entry from a
lip-mount, without causing wind noise, coax damage or water leaks.
Gold-Plated UHF (SO-239/PL-259) connectors.
|
|
|
CK-3M5 |
|
Deluxe Cable Assembly.
16
feet 9 inches total length including 18 inches of RG-188 teflon coax for
easy entry from a lip-mount, without causing wind noise, coax damage or
water leaks. Gold-Plated UHF (SO-239/PL-259) connectors. |
|
| |
|
|
3D4M
|
|
Standard Cable Assembly.
13 feet of low loss coax. Gold-plated UHF
(PL-259/SO-239) connectors.
|
|
|
3D5M
|
|
Standard Cable Assembly.
16 feet 9 inches 13 feet of low loss coax. Gold-plated UHF
(PL-259/SO-239) connectors |
|
| |
|
|
3D4N
|
|
Standard Cable Assembly with N-Connectors.
Recommended to 900MHz. 13 feet low loss coax
|
|
|
5D4N
|
|
13 feet of extremely low
loss coax. Gold-plated N-type connectors. Recommended up to 2400MHz.
|
|
| |
|
| |
|
 CR5M
|
|
Standard Cable Assembly
16 feet 9 inches of RG-58/U coax with UHF
(PL-259/SO-239) connectors |
|
| |
|
| |
|
| |
|
| |
|
| |
|
