| The Ameritron RCS-4 is a remote controlled coax switch
that selects one of four outputs by supplying all control voltages
through the coax. The elimination of control cables gives you a fast,
neat and inexpensive installation w with only one coaxial line for four
antennas.
You get two units -- the switching box that can be tower, mast or
wall mounted and the control console that is located at your operating
station. The attractive indoor console has bright LED antenna selector
indicators. A steel enclosure provides 100% shielding to prevent RFI and
TVI. Switching time is 50ms. SO-239 connectors provide reliable
connections. The weatherproof switching box uses three heavy duty 10
ampere contact relays on a rugged G-10 fiberglass circuit board. Quality
components are used throughout the entire unit to ensure maximum life
for the sometimes difficult-to-reach switching box.
The RCS-4 operates from 120 VAC power source that allows safe
operation with 14 volts control voltage. Frequencies from 1.8 to through
30 MHz are covered by this excellent station accessory. handles 1500
watts continuous.
Specifications:
- Number of antenna positions: 4
- Loss at 30MHz: Less than .05dB
- VSWR: 1.1:1 from 1.8 to 30 MHz
- Impedance: 50 Ohms
- Power Capability: 1500 Watts average continuous
- Antenna select time: 50ms
- Power requirements: 120 VAC 50/60 Hz at 5 Watts.
- Connectors: SO-239
- Control Box: 6 1/8"D x 5 1/4"W x 3 3/8" H
- Switch Box: 5 3/8"D x 7"W x 3"H
|
