| Ameritron's new class of Near Legal Limit Amplifiers give you nearly full
legal SSB power output for 65% of the price of a full legal limit amplifier...
and no one will ever know the difference! You get 1300 Watts PEP SSB nominal
power out on amateur bands 160-15M. Four rugged 572B tubes give you near legal
limit power and instant 3 second warm-up time. This whisper quiet, desktop
linear plugs into your nearest 120 VAC outlet - no special wiring needed.
You get ... Ameritron's exclusive Instantaneous RF Bias, dynamic ALC,
ParasiticKiller, Step-Start Inrush Protection...heavy duty power supply... fully
neutralized tubes...Pi/Pi-L network...tuned input...pressurized ventilation...
dual lighted Cross-Needle meters... multi-voltage power transformer... front
panel ALC control....6:1 vernier reduction drives... much more!
Four rugged Tubes
The AL-572 uses four rugged fully neutralized tubes. Each tube has a heavy duty
Graphite Anode, low loss which Ceramic Base, superior Titanium Getter and
legendary quality. Ameritron's exclusive ParasiticKiller effectively suppresses
all parasitic oscillations.
Near Legal Limit Power Output
You'll typically get 1300 Watts PEP SSB, 1000 Watts CW continuous, 1000 Watts
1/2 hour PEP two-tone test on all amateur bands from 160 through 15 Meters (WARC
bands and 10 Meters with reduced performance -- user modified for 10/12 Meters
with license).
Instantaneous RF Bias eliminates heat
Ameritron's exclusive Instantaneous RF Bias completely turns off the 572B tubes
between words and dots and dashes. it eliminates hundreds of watts wasted as
heat to give you cooler operations nd longer component life.
Dynamic ALC doubles average SSB power
Ameritron's exclusive Dynamic ALC gives you high level, low distortion RF
processing it can more than double your average SSB power. Front panel control
lets you adjust output power.
Heavy duty Power Supply
A heavy duty power supply using a high silicon steel transformer delivers 2500
volts 0.7 amps with good regulation. The plate supply uses a full wave doubler,
200 amp peak surge current diodes, 7 watt, 50 K ohm wire wound bleeder resistors
and a bank of high quality computer grade capacitors totaling 26 ufd.
Step-Start Inrush Protection
When you turn on your amplifier, a massive inrush current flows. Eventually this
current will damage your amplifier. Ameritron's Step-Start Inrush Protection
limits damaging inrush current to your power supply and tube filament. This
greatly extends the life of your amplifier components and tubes.
Pi/Pi-L Output Network
The AL-572 Pi/Pi-L output network gives you exceptionally smooth tuning, wide
matching range, full band coverage and peak performance at all power levels.
Ball bearing vernier reduction drives on plate and load controls make tuning
precise and easy. Detailed logging scales let you quickly return to your
favorite frequency.
Tuned Input lets your rig deliver full output
A Pi-Network tuned input using slug tuned coils provides a good 50 ohm load for
your rig. Even the fussiest solid state rig will deliver full power to your
AL-572.
Whisper Quiet pressurized cooling
A whisper quiet internal fan draws in cool air over power supply components and
pressurizes the tube compartment to remove heat for longest life.
To lighted Cross-Needle Meters
Gride current, plate current and forward PEP output power are continuously
monitored to tell you of improper loading and abnormal conditions. A fourth
scale switches among peak reflected power (and SWR), high voltage, ALC threshold
and ALC output voltage.
Multi-Voltage Power Transformer
Ameritron's Multi-Voltage Power Transformer has a unique buck-boost winding. It
lets you select from 14 primary voltages centered on 115 and 230 VAC. You can
match your AL-572 to your AC line voltage so you'll get peak performance and
long component life -- regardless of your line voltage.
QSK Compatible
For lightning fast QSK operation use the optional Ameritron electronic PIN diode
QSK switch. Use the external QSK unit or install the internal QSK-5PC board.
Contact Ameritron.
Plus More!
An Operate/Standby switch lets you run barefoot, but you can instantly switch to
full power if you need it.
Transmit LED; 12 VDC, 200 mA accessory jack; 12 VDC keying relay for solid
state/tube rigs; tought, nearly indestructible Lexan-over-aluminum front panel.
Shipped with transformer installed and wired for 120 VAC. Draw 16 amps at 120
VAC.
Ameritron Warranty
In the unlikely even that there are defects in materials or workmanship,
Ameritron will fix your AL-572 free for a full year.
Made in the USA |
