| Ameritron's ADL-2500 2500 Watt fan cooled dummy load
handles any legal limit amplifier! It lets you tune up your expensive
amplifier fast and safely. You'll find it handy for tuning, testing and
repairing your amplifier, transceiver or transmitter and for setting
power level, adjusting your mic gain and more!
Works with all amplifiers, transceiver and transmitter from DC
through 6 Meters. It can dissipate 2500 watts average power for one
minute on, ten minutes off. Handles 300 Watts continuous. See power
curve. SWR is less than 1.25 to 1 below 30 MHz and less than 1.4 from 30
to 60 MHz.
Four 50 Ohm non-inductive super high energy density resistors are
used. They're made with dispersed carbon particles fired in a ceramic
matrix. each has an incredibly high energy density of 7000 joules per
cubic inch per second with a voltage gradient of 10 kV per inch!
Detailed specifications and power curve is permanently silk-screened on
the cabinet for each reference. A whisper quiet DC brushless fan with
ball bearings generates a huge volume of air flow for efficient cooling.
Use 12 VDC or 110 VAC. This eeavy duty aluminum chemically treated
cabinet is 9 1/2 x 8 1/4 x 4 inches. It uses PEM nuts and has SO-239
Connector. |
