West Mountain Radio
RIGblaster


Nomic

Plus

Pro

Features of the RIGblaster Plus.
bulletFully automatic operation; your mic. always works, your computer always works, no manual switching, no plugging or unplugging.
bulletNo extra manual switches needed, two DPDT relays for true automatic operation unlike other sound card interfaces.
bulletSimpler operation than the other brands, you never have to remember to push un-needed switches to make your station work.
bulletPTT override feature; your mic. can always override the computer, perfect for contesting or SSTV operation.
bulletPTT interrupt feature; your mic. can stop the computer program, our innovation.
bulletComplete with 8pin screw on and RJ45 radio mic. cable compatibility. 4pin screw on adaptor kit as an option.
bulletAutomatic switching between your mic. and the computer; never a hot mic.
bulletYou may always leave it connected, everything always works, no bypass switch required.
bulletIn addition to the PTT keying circuit there is a fully isolated CW/FSK keying output for direct keying of your rig's CW or FSK jack for use with non-sound card software, no other interface has this.
bulletInput for control of this additional fully isolated CW/FSK keying circuit as well as the PTT circuit is jumper selectable between serial port leads RTS, DTR, and TXD.
bulletDefault for this jumper block has RTS controlling the PTT circuit and DTR controlling the CW/FSK keying circuit.
bulletInternal diagnostic LEDs show at a glance what the serial port is doing with RTS, DTR and TXd, check if the other brand has this.
bulletRear panel RCA PTT switch / foot switch jack that enables the PPT override and interrupt, another exclusive.
bulletPower supply included, no charge. Your choice of 120 VAC or 230 VAC
bullet12 VDC operation easily done without the included power supply, an isolated power supply is good ground loop protection however.