Rohn 25G Series Guyed Tower
25G Midsection 25G Accessories
 

Rohn 25G tower is  a 12" face triangular design using 1-1/4" steel legs and continuous 5/16" steel rod bracing. Middle sections measure 10 feet long, top sections are approximately nine. The tower is a guyed design; three anchors spaced 120° apart, are set out from the base 80% of the tower height.  Supplied with nuts and bolts.

 1/2X12BB Base Bolt
3/4X12PP Pier Pin
25AG2 Sleeve Top
25AG3 Sleeve Top
25AG4 Flat Top
AS25G Rotor Shelf
BAS25G Bearing Access. Shelf. 
BPC25G Base Plate
BPH25G Hinged Base Plate
BPL25G Bearing Plate
EP25343 Equalizer Plate (3)
EP25345 Equalizer Plate (5)
GA25GD Guy Assembly
GAR30 Concrete Anchor
HB25AG 0-15" House Bracket
HB25BG 0-24" House Bracket
HB25CG 0-36" House Bracket
SB25G Short Base Section
SB25G5 Short Base (5 FT.)
SBH25G Hinged Short Base
TB3 Thrust Bearing (2")
TB4 Thrust Bearing (3")
WP25G Work Platform

DANGER
No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
 

 WBØW, Inc., 2002.
Website design & Maintained by WBØVRD,   WebSite Problem