|
YT-100 |
|
|
|
| Description |
Yaesu radio are among the best, and LDG makes a dedicated
bolt-on tuner for the FT-897, but that leaves a big chunk of the Yaesu
product line with no dedicated tuner. Of course, most LDG tuners will work
just fine with Yaesu radios, but it sure would be nice to have it integrated
to the radio.
LDG's new YT-100 is just that. An included CAT cable interfaces with your
FT857, FT897 and FT-100 (including all D models). This makes it an
integrated tuner powered by the interface. No extra power cables are needed.
Just press the tune button on the tuner and everything else happens
automatically! The mode is set to carrier and the RF power is reduced, a
tune cycle runs and the radio is returned to the original settings.
|
| Specifications: |
- RF
Power: 1 to 100 watts SSB, CW and digital modes.
-
Latching relays for ultra low power consumption
-
Built-in CAT interface for FT-100(D), 857(D) and 897(D) radios.* Powered
from Yaesu radio over CAT port.
- CAT
thru port for computer control of radio. 4800 baud.
- 2000
memories sorted by frequency.
- 1.8 to
54 MHz coverage (continuous coverage for MARS)
- Tunes 4
to 800 ohms. (16 to 150 on 6M)
- SO-239
in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra,
ect.
-
Dimensions: 7.0”L, 7.0”W, 1.5”H. Weight: 20 ounces
-
Includes 1 foot CAT interface cable and 1 foot coax jumper.
*Note: Not for FT-450 or FT-950. Use AT-100Pro. |
|
|
|
|
|
We accept Visa, MasterCard,
Discover, and American Express.
* All Prices and
availability are subject to change without notice. Most orders shipped
same day. Please call first 1-800-626-0834
|
