AD-1 Microphone Adapters for Heil Boomsets
By
leaving the adapters plugged in your radio, you can move from transceiver
to transceiver with the Pro Series Boomset without having to rewire the
microphone for each individual radio.
Features:
•
|
All Heil
Boomsets require the appropriate adapter to mate them to your
particular model transceiver. |
|
• |
Custom orders are
available for other brands. |
|
• |
A 1/4"
female jack exits the radio connector for connections for a PTT switch
or footswitch. |
Specifications:
The AD-1 Series adapters come in 4 pin, 8
pin and modular style connectors.
Specify your exact needs when
ordering (Example: Kenwood 4 pin, Yaesu 8 pin)
|
The AD-100 Adapter
for the
Yaesu FT 100 Radio |
| |
The Yaesu FT 100
multiplexes the PTT, Mic audio, touch tone signals and control data
onto one single line making it impossible to use anything other than
the stock microphone with this great little radio.
The Heil AD-100 has been developed so all Heil dynamic microphones and
headsets can be used with the Yaesu FT 100. Its 8 pin modular jack
plugs into the FT 100 and interfaces into an 8 pin male connector
whereas our CC-1 Y or AD-1Y adapters and cables will work into the FT
100. SO to use our Goldline on the Yaesu FT 100 you will need the
AD-100 and our CC-1. To use the PROSet or BM-10 you will use the
AD-100 and an AD-1Y.
Note:
Neither the Traveler or our 'iC' elements will work on the FT 100.
Only our HC dynamic elements plugged into our AD-100 adapter will work
with your FT 100. |
| |
|
HDAT Headphone
Attenuator for Yaesu FT 100 Radio |
| |
Many of the smaller transceivers today
have 1/8" female Headphone jacks. This new Heil HDAT adapter allows
the 1/4" headphone jacks of our boomsets to be used into these 1/8"
outputs. The HDAT also has a 6 dB pad to reduce the output for safe
and comfortable use of the Heil headsets with the speaker outs of
these new radios that have NO true headphone jacks. |
